Go Direct* Melt Station, accurately determines the melting temperature of solid substances, Body Dimensions: 9 cm x 9 cm x 24 cm, Base Dimensions: 13 cm x 15 cm x 1.5 cm, Range: Ambient to 260 deg C, Lighting of control dial: Red LED, Blue LED, Yellow LED, Weight: 1.0 kg
Go Direct* Acceleration Sensor, Low acceleration: +/-157 m/s2, High acceleration: +/-1,960 m/s2, Altimeter: -1,800 m to 10,000 m, Angle: +/-180 deg, with Wireless: Bluetooth Connections, Wired: USB Connection, Slip it into your pocket and pirouette or ride a half-pipe
Go Direct Respiration Belt, Range: 0-50 N, Resolution: 0.01 N, Response time: 50 ms, Maximum chest circumference: 140 cm, with Wireless: Bluetooth Connections, Wired: USB Connection, Measure steps and step rate during a study with the built-in pedometer
Go Direct* CO2 Gas Sensor, CO2 Sensor Range: 0-100,000 ppm, Resolution: 1 ppm CO2, with Wireless: Bluetooth, Wired: USB connections,Study the effect of temperature on cell respiration or metabolism of organisms, Dimension: 38x28mm, Total length: 155 mm
Go Direct* Ammonium Ion-Selective Electrode, Range: 1 to 18,000 mg/L, 2-7 PH, 0.1 to 5 M omega Electrode resistance, 300 mA Li-Poly Battery, 500full charge cycles (several years depending on usage)Battery life, connects via Bluetooth* wireless technology
Go Direct* Sound Sensor is used to easily capture and evaluate waveforms, connects via Bluetooth* wireless technology or wired via USB, for College, High School, and K–8, Rechargeable Battery, Response: A- or C-weighted, Range: 55–110 dB, Resolution: 0.1 dB
Spectrophotometer Optical Fiber, designed exclusively for emission spectrum experiments, Simply insert the unit into the cuvette holder, and point the tip of the 1 m optical fiber at a light source, wavelength range: 350 nm to 900 nm
Voltage Probe, This sensor is used to measure voltages in the range of -30 to +30 voltsUse this sensor in experiments that involve voltages larger than 10 volts, such as when working with large solar panels. Since this voltage probe covers
Go Direct* Calcium Ion-Selective Electrode, used to measure the concentration of calcium (Ca2+) in aqueous samples, connects via Bluetooth* wireless technology or wired via USB to your device, For Go Wireless* Electrode Amplifier, Go Wireless* PH
Dynamics Cart and Track System with Go Direct* Sensor Cart and Long Track, for College and High School, completely wireless system simplifies experiment setup & allows basic experiments to be conducted with/without the track, Position resolution: 0.25mm
Go Direct* Sensor Cart, Green, for College, High School, and Middle School Science, features built-in, wireless sensors for one-dimensional dynamics and kinematics experiments, directly connects wirelessly via Bluetooth, Position resolution: 0.25 mm
Go Direct* Gas Pressure Sensor, measures the absolute pressure of a gas, Specifications: Range: 0 to 400 kPa, Resolution: 0.03 kPa, Maximum pressure that the sensor can tolerate without permanent damage: 450 kPa, Connections: Wireless Bluetooth, Wired USB
Go Direct* pH Sensor, is a general-purpose pH sensor used to monitor pH of aqueous solutions, pH range: 0-14, Type: Sealed, gel-filled, epoxy body, Ag/AgCl reference, Shaft diameter: 12 mm OD, Storage solution: pH-4/KCl solution (10 g KCl in 100 mL buffer pH-4 solution)
Go Direct* Tris-Compatible Flat pH User Manual, used for any lab or demonstration that can be done with a traditional pH meter, including acid-base titrations, monitoring pH in an aquarium, and investigating the water quality of streams and lakes
Go Direct* Current Probe User Manual, Probe range: +/-1 A and +/-0.1 A, 300 mA Li-Poly Battery, 24 hours Battery life, 500 full charge cycles (several years depending on usage) Battery life (long term), 1.5 A and 0.5 A non-damaging current, volt: +/-10 V